How to activate Windows 11 with a product key (3 ways)

Activating Windows 11 takes about two minutes. You need a product key for the same edition that is installed — a Home key for Windows 11 Home, a Pro key for Windows 11 Pro. A Pro key on Home is also fine: Windows will upgrade itself to Pro.

Before you start: check your edition

Open Settings → System → About and look at Windows specifications → Edition. If it says Windows 11 Home and you have a Pro key, that’s fine — see method 1. If it says Pro and you have a Home key, the key will not work: you need a Windows 11 Pro key or to reinstall Home.

Method 1: Settings (easiest)

  1. Open Settings → System → Activation.
  2. Expand Upgrade your edition of Windows (or Change product key) and click Change.
  3. Paste the 25-character key and click Next.
  4. Wait for the message Windows is activated.

If you entered a Pro key on Home, Windows downloads the Pro components and restarts. Your files and apps stay in place — this is exactly how the Home to Pro upgrade works.

Method 2: Command line (slmgr)

Useful on PCs where the Settings page shows an error, or for remote administration.

  1. Right-click Start → Terminal (Admin).
  2. Install the key:
slmgr /ipk XXXXX-XXXXX-XXXXX-XXXXX-XXXXX
  1. Activate online:
slmgr /ato
  1. Check the result with slmgr /xpr — it should say The machine is permanently activated.

Method 3: Offline activation (no internet on the PC)

Microsoft discontinued activation by phone call on 3 December 2025; the phone line now only points to a web portal. The offline method itself still works, and the PC can stay offline the whole time:

  1. Press Win + R, type slui 4 and press Enter to see the Installation ID. In Terminal (Admin), slmgr /dti shows the same ID.
  2. On a phone or another device with internet, open visualsupport.microsoft.com/activate (Microsoft Product Activation Portal), sign in with a Microsoft account if asked, and enter the Installation ID.
  3. The portal gives you a Confirmation ID. Enter it in the slui window, or run:
slmgr /atp <ConfirmationID>
  1. Check the result with slmgr /xpr.

This is also the route to try when online activation reports that a key has been used too many times after a hardware change.

After activation, sign in with a Microsoft account (Settings → Accounts → Your info). The digital license is then linked to your account, and if you replace the motherboard later you can reactivate with the activation troubleshooter instead of buying a new key. More on this in how to transfer a Windows license to a new PC.

If activation fails

Note the error code and look it up in our activation error library. The most common ones:

  • 0xC004F213 — no key found after a hardware change.
  • 0x803F7001 — the device has no digital license yet.
  • 0xC004C003 — the key is blocked.
  • 0x80072F8F — wrong date/time or a proxy blocks the connection.

FAQ

Do I need internet to activate Windows 11?

Online activation needs an internet connection for a few seconds. Without internet on the PC, run slui 4 to see the Installation ID, enter it at visualsupport.microsoft.com/activate on your phone, and type the Confirmation ID back in.

Can I use a Windows 10 key for Windows 11?

Usually yes — Windows 10 Home and Pro keys of the same edition also activate Windows 11, but Windows 10 itself is no longer supported.

What happens if I don't activate Windows 11?

Windows keeps working, but you'll see a watermark, can't change personalization settings and will get reminders to activate.

Still stuck? Write to support@keytory.com — we reply within a few hours.

Next guideHow to transfer a Windows 11 license to a new PC
Contents